View Full Version : Need help/assistance in removing burnt bulbs..


mrLED
04-04-2006, 07:36 PM
Ok, so my dad has a 99 Ltd 4runner and some of the interior lights are out. Specifically the driver window button light and the Climate control bulbs are not working, but it still functions properly. I just hate it when i have to operate the Climate Control and i cant see jack. If i was working on my accord, i wouldnt have ne problems goin in and out, but i've never worked on this car before, so i'll need some help.

Basically, i need directions or links as to how to remove and replace the bulbs for the door and the Climate Control.

mrLED
04-06-2006, 12:43 AM
so no knows?

rakesh
05-12-2006, 12:34 AM
door removal:

2 screws on bottom
1-2 visible clips on left and right of panel
1 screw in door handle
remove door handle by pushing clip off door handle rod
--- be very carefull not to break this clip
2 hidden screws in the arm rest
--- lift with a hook tool or panel remover and exspose two screws
rest of the door edge is pop clips

good luck:)