Need Help for my Intake

4Runner Forum Classifieds Photo Gallery Member List Search Contact Sponsors
4Runner News Recalls & TSBs Forum FAQ Calendars Timeslips Register Now Login

Need Help for my Intake

Printable Version

4Runner >> Brand Reviews >> Headers, Intake, & Exhaust >> Need Help for my Intake

Page: [1]

Message

<< Older Topic Newer Topic >>

Need Help for my Intake - 7/1/2004 12:36:33 AM

Palffy_33

Posts: 1
Joined: 7/1/2004
From: United States
Status: offline

I am currently using an AEM intake which was originally was for
a Mits. Galant, but now installed in my Runner. At first I took out
the box which contained the air filter and replaced that w/ a
cone filter. There was a difference in power and better
response. Then I took out the stock tube and replaced that w/
the AEM tube. It feels like it lost power. and when I start up the
engine, usually the needle is about 3 tick makrs above the 1
rpm. Now w/ the AEM tube, the needle starts off at the 4th tick
mark from the bottom.

PLEASE HELP!
thx in advance

Post #: 1

Need Help for my Intake - 11/5/2004 12:45:29 AM

Keggo

Posts: 202
Joined: 10/26/2004
From: United States
Status: offline

Yours is EFI, I assume? Is your intake sensor hooked up or anything? does the Mits. AEM tube have a spot to hook up the 4Runner's sensor? If I were you, I'd take a look at that... that sensor is pretty important as to how the engine reacts. That's how it knows how much fuel to give to the engine, I believe... Correct me if I'm wrong.

(in reply to Palffy_33)

Post #: 2