Toyota 4Runner Forum - Toyota 4Runner Enthusiasts Forum

Toyota 4Runner Forum - Toyota 4Runner Enthusiasts Forum (https://www.4runnerforum.com/forum/)
-   General Tech Help (https://www.4runnerforum.com/forum/general-tech-help-8/)
-   -   '94 3.0 L V6 automatic transmission Overdrive problem (https://www.4runnerforum.com/forum/general-tech-help-8/94-3-0-l-v6-automatic-transmission-overdrive-problem-2901/)

JohnClark 04-04-2010 11:28 PM

'94 3.0 L V6 automatic transmission Overdrive problem
 
When the vehicle is cold it will not shift into overdrive. After several minutes however it shifts normally. I changed the transmission filter and fluid. And after some thought and research into the Electronically Controlled transmission I think it might be the Coolant temperature sensor.
Any other ideas or comments?

my vehicle is an automatic 1994 4runner 3.0 L v6 with 4wd.

JohnClark 04-05-2010 12:18 AM

oh yeah the transmission is the A340H.

kwc 05-01-2010 08:49 PM

THis is normal for it to not shift until the engine has reached a predetermined temp. unless it is taking a long time to supshift, of if it hunts when warm. In those cases it can be a bad splice joint in the harness that runs along the top front of the engine

Akm88 07-01-2010 11:35 PM

Hi,
i am new to this one!!!!!!!!!!!!!

msarles1 11-06-2010 02:32 PM

i have a 94 3.0 with same exact problem, only cold no overdrive, when it warms up i have overdrive if i come to a full stop first ? any clues out there ?

JamesBond 11-29-2010 12:38 PM


Originally Posted by msarles1 (Post 7305)
i have a 94 3.0 with same exact problem, only cold no overdrive, when it warms up i have hid headlight kits overdrive if i come to a full stop first ? any clues out there ?


Wow this problem is a lot more common then I though as I am experiencing the same thing =(

John Dickerson 10-19-2012 07:30 PM

overdrive problem
 
hi i have a 1994 toyota 4 runner 3.0l v6 4x4 4 speed automatic with overdrive, my overdrive light flashes when in overdrive, what can i do to fix it

jtimports 10-20-2012 07:37 PM

John Dickerson - if it just continues to flash it means the overdrive is not engaged. Did you do any recent work in the engine bay? The connecter may have come loose by unlikely.


All times are GMT -5. The time now is 06:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands