General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

'94 4Runner Tie Rod Ends Replacement

Thread Tools
 
Search this Thread
 
  #1  
Old 03-04-2011, 12:01 PM
Dylan's Avatar
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Kansas City, MO
Posts: 3
Default '94 4Runner Tie Rod Ends Replacement

1994 4Runner SR5 V6

To keep it short, the right side inner and outer tie rod ends are frozen and need to be replaced. I called around to 3 Toyota dealerships to get estimates on costs and they range from $370-$700 depending on just replacing the one side or replacing both (as one service tech "recommended"). The problem was found when I was at a Honda dealership for a complimentary non-Honda alignment. So a Toyota tech has not actually looked at the problem 1st hand yet...

I'm not a mechanic, but I am very capable of doing certain repairs on my own. I am wondering if this is a task that I could tackle on my own, with proper tools. I understand that an alignment is suggested afterward for obvious reasons, and I would go to a certified mechanic for this. Bottom line, I'm young and can't afford a large cost (esp. if it's in the $700 range).

Also, I recall a tech saying something about the sway bar coming into question with this kind of service. Thanks in advance for your thoughts and advice.
 
  #2  
Old 03-24-2011, 12:27 PM
Dylan's Avatar
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Kansas City, MO
Posts: 3
Default

bump bump bump
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Classic93
4RF Help & Suggestion Center
0
12-26-2015 06:31 PM
msarles1
New Member Area
1
10-22-2010 07:56 AM
Swampcroc
General Tech Help
0
05-03-2010 07:10 AM
chaplainken
General Tech Help
0
02-01-2009 02:28 PM
knuckles
General Tech Help
0
04-24-2007 04:06 PM



Quick Reply: '94 4Runner Tie Rod Ends Replacement



All times are GMT -5. The time now is 07:14 PM.