Hey guys! I have a 96 4runner and put a 2.5 inch lift on it. I was told by my shop that is the biggest lift I can put on a 96. Is that true? I dont want to do a body lift but would like about a four inch lift if I can. Any help would be great.

 

just wondering what kind of lift is it, would it work on a 1997 2.7 liter 5 speed manual, and if so, how much did you pay for it

 

Working on it, I replied to your other thread..

Ok here it is... Good reading, enjoy..

http://www.downeyoff-road.com/Suspen...s/1996-06.html

 

Hey Bristow,
I have the same vehicle as you do and put on a lift using total chaos spacers after a buddy of mine dumped a whole lot of money into the downey system, cranked it up and found that it was too stiff with the springs compressed. I am running 32"x12.5" tires and did have to trim out the plastic wheel liner
in some places. As far as ride goes, it is very comfortable (changed the rear shocks to the rancho adjustable shocks) and feels close to stock. Cost was very affordable and a buddy and i did all
4 in one evening. A very long evening. The fronts are the hardest and the first side took 4 hours,
the next side took 45 minutes. If you want to look at it, go to Alpine Superchargers web site,
click on the home page tab, then customer gallery, then Arts 99 4-Runner. They got the year wrong,
it is a 97. Customer service was great from Total Chaos, the kit comes with the owners cell phone
number and he is a great help when you are doing the install.

 

Do a seach for Performance Products.
I get their catalogs, and they had serveral kits for 4Runners and could probably answer your questions. I've owned a '96 4Runner...Desert Dune Limited 4WD. I was cool, for sure.