Error Codes
#1
Error Codes
Hi all, I have a check engine light on, got the codes ( P0125 & P1130)
The first is "Insufficient Coolant Temperature for Closed Loop Operation" and the other was "Air/Fuel Sensor Circuit Range/Performance. (Bank 1 Sensor 1)"
From what I have been reading, this is not "Coolant" related, but more likely has to do with one of the O2 sensors.
Any thoughts?
TIA,
Del
The first is "Insufficient Coolant Temperature for Closed Loop Operation" and the other was "Air/Fuel Sensor Circuit Range/Performance. (Bank 1 Sensor 1)"
From what I have been reading, this is not "Coolant" related, but more likely has to do with one of the O2 sensors.
Any thoughts?
TIA,
Del
#3
RE: Error Codes
You might be able to tell on the door Jam sticker.. Also can look up he VIN online.
Running hot could be a Air fuel mixture problem. These codes are only just approx usually. I would only fix one and then see and then if it doesnt work go with the other. 02 sensors usually should be changed depending on vehicle 80,000-100,000 miles..
Also what vehicle is this????
Running hot could be a Air fuel mixture problem. These codes are only just approx usually. I would only fix one and then see and then if it doesnt work go with the other. 02 sensors usually should be changed depending on vehicle 80,000-100,000 miles..
Also what vehicle is this????
Thread
Thread Starter
Forum
Replies
Last Post