New member
#1
New member
Hi all,
My son hust bought a 1992 V6 petrol 4 runner. Apart from the side steps and bullbar it is absolutley stock.
Looking at making some major mods to it over the next few months,
[ol][*]At least a 2" suspension lift, plus a body lift if possible, as well and steering mods[*]Fitting larger tyres, (hopefully some one can tell the tallest tyre you can fit under them)[*]Replacing the rear diff with a detroit locker and an ARB locker to the front[*]new winch bar and winch[*]decent comms[*]snorkel[*]and a set of roof racks[*]possibly ripping the side steps off and adding a decent set of sliders.[*]last but not least if the V6 doesnt perform a transplant is in order[/ol]
hopefully others have already done this work to their runners, which makes my job easier.
cheers
Baldman
My son hust bought a 1992 V6 petrol 4 runner. Apart from the side steps and bullbar it is absolutley stock.
Looking at making some major mods to it over the next few months,
[ol][*]At least a 2" suspension lift, plus a body lift if possible, as well and steering mods[*]Fitting larger tyres, (hopefully some one can tell the tallest tyre you can fit under them)[*]Replacing the rear diff with a detroit locker and an ARB locker to the front[*]new winch bar and winch[*]decent comms[*]snorkel[*]and a set of roof racks[*]possibly ripping the side steps off and adding a decent set of sliders.[*]last but not least if the V6 doesnt perform a transplant is in order[/ol]
hopefully others have already done this work to their runners, which makes my job easier.
cheers
Baldman
#2
RE: New member
WELCOME TO THE FORUM
I have done alot of these to my old runner. First you need to find out if you want to keep ther IFS or go straight axle in the front THAT IS FIRST AND FAR MOST IMPORTANT.
I have done alot of these to my old runner. First you need to find out if you want to keep ther IFS or go straight axle in the front THAT IS FIRST AND FAR MOST IMPORTANT.
Thread
Thread Starter
Forum
Replies
Last Post