General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

antenna froze

Thread Tools
 
Search this Thread
 
Old Dec 13, 2004 | 03:18 PM
  #1  
Jack777's Avatar
Thread Starter
Joined: Jul 2004
Posts: 4
From: United States
Default antenna froze

My antenna froze and now it will not go up/down. I can hear the motor running when I turn the ignition on and off. I pulled the antenna (only) from the fender and it has a 5-6 inch white plastic piece that is disconnected from the motor…..I think

Does anybody know a step-by step procedure on how to fix it? Where can I buy the parts?

HAPPY HOLIDAYS!

Dakrri
 
Old Dec 14, 2004 | 05:44 PM
  #2  
Keggo's Avatar
Super Moderator
Joined: Oct 2004
Posts: 204
From: United States
Default antenna froze

Hey! How's it going? I know a lot of people are actually just putting whip antennas on their runners... So, You could just buy a replacement... or, if you really want to fix it, check out http://www.yotatech.com!
 
Old Dec 14, 2004 | 06:23 PM
  #3  
Jack777's Avatar
Thread Starter
Joined: Jul 2004
Posts: 4
From: United States
Default antenna froze

Thanks Keggo, I'll check that site.

I could keep the antenna I have, and just cut the power wire to the motor. Anybody know were that wire would be? I can't pull the fuse because that controls a few other things.
 
Old Jan 12, 2005 | 06:10 AM
  #4  
mudbuster's Avatar
Joined: Jan 2005
Posts: 24
From: United States
Default antenna froze

the motor should have wires going into it at the bottom just cut the hot wire and tape it of and then fasten it to the motor so one day if you want to fix it you can just hook the wire back up
 
Old Jan 21, 2005 | 01:29 PM
  #5  
rangertom's Avatar
Joined: Jan 2005
Posts: 4
From: United States
Default antenna froze

I had this same problem - the "mast" as they call it broke so won't go up. Where can I find the parts to install a whip antenna? BTW I've got a '95....
 
Old Feb 1, 2005 | 06:02 PM
  #6  
chrisngo's Avatar
Joined: Feb 2005
Posts: 3
From: United States
Default antenna froze

That happened to my 92 Runner. I tried a couple of different antennas and various parts stores, the only one that I found to work well because of the slope and angle of the hole in the fender is one from Pep Boys. The base is almost 90 degrees from the fender and the mast screws into a threaded section 90 degrees from the mast. Worked great! Good luck!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jhugh
General Tech Help
3
May 2, 2008 07:35 AM
bristow
Audio/Visual Electronics
3
Nov 15, 2007 12:03 PM
texas4runner
Audio/Visual Electronics
2
Jun 4, 2007 09:23 AM
mdunnrt
Audio/Visual Electronics
2
May 1, 2007 01:09 PM
sperry
General 4Runner Chat
8
Nov 13, 2006 11:16 PM




All times are GMT -5. The time now is 07:44 AM.